How to use the fountain aerator？

How to use the fountain aerator？

The use of fountain aerators mainly includes installation, power connection, startup and operation, and daily maintenance and care. The following is a detailed description of these steps:
1. Installation
Determine the installation location: Select a suitable installation location based on the water depth, area and shape of the pond or river, as well as the technical parameters of the aerator. Generally, the aerator should be installed in the center of the pond or in a slightly upwind position, more than 5 meters away from the pool embankment, so as to better stir the water and increase the dissolved oxygen content.
Fix the aerator: Use suitable materials such as nylon rope to fix the aerator in a suitable position in the riverbed or pond. It is not allowed to use metal wires such as iron wire to pull and fix the aerator to prevent corrosion and damage.
Check the installation: Make sure that the aerator is installed firmly without looseness or tilting. At the same time, check whether the various components of the aerator are intact and not damaged or missing.
2. Connect the power supply
Use a dedicated circuit: Provide a dedicated power circuit for the aerator to ensure the safety and stability of the circuit. The specifications of the power cord should meet the power requirements of the aerator.
Electrician operation: The power supply should be connected by a professional electrician in accordance with the safety operation procedures to ensure that the wiring is correct and firm, and the leakage protection device is installed.
Cable fixing: The cable leading out of the motor junction box should be fastened to the support rod with nylon rope to prevent the cable from falling off during the movement of the aerator, resulting in three-phase loss and damage to the motor.
3. Start-up operation
Pre-startup inspection: Before starting the aerator, check whether the connector and the motor junction box in the power input line are loose, and whether the various components of the aerator are in good condition.
Start the aerator: After connecting the power supply, start the equipment according to the operating procedures of the aerator. Observe whether the motor is running in the correct direction within a few seconds after starting. If it is reversed, it should be adjusted in time.
Adjust the nozzle: Adjust the nozzle of the aerator to the appropriate position and angle as needed, so as to better spray the pool water into the air to form a water mist and increase the contact area between water and air.
Observe the operation: During the operation of the aerator, its operation should be closely observed, including whether the motor is running smoothly and whether the water mist is sprayed evenly. If abnormal noise or vibration is found, the machine should be stopped immediately for inspection and troubleshooting.
4. Daily maintenance and care
Regular inspection: Regularly inspect and maintain various parts of the aerator, including cables, joints, gears, bearings, etc. Parts that are found to be damaged or severely worn should be replaced in time.
Cleaning and maintenance: Regularly clean the nozzles and pipes of the aerator and other parts to prevent blockage and dirt accumulation. At the same time, keep the appearance of the aerator clean and dry.
Storage and custody: When the aerator is not in use, it should be stored in a dry, ventilated, non-corrosive gas environment. Avoid long-term exposure to sunlight or humid environments.
5. Precautions
Safe use of electricity: When using the aerator, the safe use of electricity rules should be strictly followed to ensure the safety and stability of the power circuit. Avoid using the aerator in rainy or humid environments to prevent electric shock accidents.
Reasonable use: Reasonably arrange the use time and frequency of the aerator according to factors such as the water quality conditions of the pond or river, the stocking density of fish and the growing season. Avoid excessive use or waste of energy.
Timely maintenance: When the aerator is found to be faulty or abnormal, it should be stopped for inspection and maintenance in time to avoid the expansion of the fault or damage to other components.

  If you have an order for aerator products, please feel free to contact us, our professional sales consultants will provide you with professional advice, the best prices and preferential services. 

Request Free Samples/Quote